Enclosed Track Overhead Conveyor Roller Chain System

Enclosed Track Overhead Conveyor Roller Chain System

Description

We also have all spare parts for whole system, such as driver device, take-up deivc/tensioner, straight track, curve track, up-down track/vertical track, check track, flange, oil sprayer, electric cabinet.

According to customers' drawing, we can calculate all need parts for whole system.

Straight track for chain conveyor

Features: for where conveyor chain go straight.

                  standard length is 3 meters.

                   it can be cut according to the specific install condition.

Vertical vurve track for chain conveyor

Features: for rising or falling areas.

                   standard diameter is 1.2 meters,180º angle.

                   it can be cut based on any necessary angles of any install conditions.

                   the angle should not be more than 45º angle.

                   the distance between two adjiacent hangers should be considered.

Horizontal curve track

Features: for horizontal areas.

                   standard diameter caries from 0.8m to  2m, 180º angle.

                   it can be cut based on any necessary angles of any install conditions.

                   horizontal bending head can be processed based on customers particular requires.

Check track for  chain converyor

Features: There is a hatch which can open the track, through the hatch, worker can dismantle or install, check or maintain the conveying chains.

               Driving device for each conveying route is usually located between driver and take-up device for easy checking and maintenace.

Caterpillar Driver device for  chain converyor

Features:  Two types-Standard type and heavy duty type.

                 The driving device adjust the momentum that the motor ouput, after speed reduction unit increase its power which is to be passed to the driver caterpiller, the pusher dogs on which transport the chain so that chain can move forward.

Take-up device for  chain converyor

Features:  Keep the chains in the state of original tension and compensate for the tensile deformation caused by tensile force or telescopic deformaton caused by varied temperature while working.

                    Make sure certain tensile force between driver and take-up device.

                    Install it behind driver about distance 3~6 meters.

                    Stable conveying, little noise, highly reliable conveying force and speed.

Application